74ls04n

March 27, 2024 Post a Comment

74ls04n

74LS04 is a 2 input quadruple 8-bit NOT gate IC. Inverter in logic converters is an electronics device whose basic functions are to invert the incoming logic weather it is HIGH or LOW. They are also known as NOT gates.

What is the difference between IC 74LS04 and IC 74HC04?

III 74LS04 VS. 74HC04 is a hex inverter of CMOS circuit, and the working voltage is 2V-6V. Both 74LS04 and 74HC04 are inverters, but LS stands for low-power Schottky and HC is high-speed COMS. LS is slightly faster than HC. LS adopts TTL level.

What is hex inverter IC?

Hex Inverters - A hex inverter is a type of an integrated circuit that contains six inverters. Inverters are the foundation in digital electronics. Many sophisticated digital devices use inverters, including multiplexers, decoders, and state machines.

What is the function of pin 7 in 74LS04 TTL IC?

PINS		DETAIL
3A	Pin 5	Pin 5 will be used as the input for the third inverter.
3Y	Pin 6	Pin 6 will give the output of the third inverter.
GND	Pin 7	Pin 7 will be used as a common ground pin when IC will be used with other IC.
4Y	Pin 8	Pin 8 will give the output of the fourth inverter.

What gate is 74LS04?

The 74LS04 is a Hex Inverter (NOT gate) IC, i.e. it has six NOT gates inside it and each gate has one input and one output pin. All six NOT gates are powered with a common rail but can operate independently.

How many inverters are in the 74LS04 IC?

These devices contain six independent inverters.

What is the difference between HC and LS chips?

“The main difference between the LS and HC is the logic of 74XX. The 74LS is Transistor to Transistor logic. Uses Shottky transistors to reduce the stored charge and get higher switching speeds then with conventional bipolar transistors. The 74HC uses MOSFET technology.

What is LM358 IC used for?

LM358 can be used as transducer amplifier, DC gain block etc. It has large dc voltage gain of 100dB. This IC can be operated on wide range of power supply from 3V to 32V for single power supply or from ±1.5V to ±16V for dual power supply and it also support large output voltage swing.

How many inputs are in a 74LS04 IC?

Logic IC, Inverter, Hex, 1 Inputs, 14 Pins, DIP, 74LS04.

Why is a hex inverter called a hex inverter?

As an integrated circuit, Hex inverter IC (hex is short for Hexa; meaning six) has numerous purposes. They include adding a delay, shifting levels, acting as converters between logic families, and acting as analog amplifiers.

Which IC is used for inverter?

IC Based Simple 12V to 240V Inverter Using MOSFET & IC 4047.

Why IC is black?

Answer. the black color is carbon. carbon absorbs radiation, in particular UV radiation which would damage the delicate internal circuits.

What are the 7th and 14th pin in all the gates?

14th pin is the Vcc and the 7th pin is the Ground. The outputs directly interface to CMOS, NMOS and TTL.

What is a 74LS04 TTL hex inverter IC?

74LS04 Hex Inverter is a member of the 74XXYY IC series. The 74-series are digital logic integrated circuits, It includes six independent inverse HEX gates. Each gate consists of an input and an output. The reverse phase is one of its main functions.

Why does IC start with 74?

Two digits, where "74" denotes a commercial temperature range device and "54" denotes a military temperature range. Historically, "64" denoted a short-lived series with an intermediate "industrial" temperature range.

Why EXO are gate is called an inverter?

Why XOR gate is called an inverter? Explanation: The XOR (Exclusive Or) gate has a true output when the two inputs are different. When one input is true, the output is the inversion of the other. When one input is false, the output is the non-inversion of the other.

How many gates does 7408 have?

The 7408 is a QUAD 2-Input AND gates and contains four independent gates each of which performs the logic AND function.

How many or gates are in a 7402 chip?

Product details. These devices contain four independent 2-input-NOR gates.

What are the 3 types of inverters?

There are 3 major types of inverters - sine wave (sometimes referred to as a "true" or "pure" sine wave), modified sine wave (actually a modified square wave), and square wave.

How many MOSFETs are used in inverter?

The driving stage has 2 MOSFETs IRF540N and the 230V / 9V-0-9V / 10A transformer boosts the output voltage. The oscilloscope is probed at gate terminal of the both MOSFETs and we get the above waveform which is square wave at around 50Hz and 50% duty cycle.